Protects your employees from dangerous electrical shocks around high voltage equipment.
Use the correct Type II protection from the following gauge switchboard matting:
Class 1: 3/16” thick, Dielectric Test Voltage: 20,000 VAC, Proof Tested over entire surface at 10,000 VAC. Recommended Maximum use Voltage: 7,500 VAC
Class 2: 1/4” thick, Dielectric Test Voltage: 30,000 VAC, Proof Tested over entire surface at 20,000 VAC. Recommended Maximum use Voltage: 17,000 VAC
Class 3: 3/8” thick, Dielectric Test Voltage: 40,000 VAC, Proof Tested over entire surface at 30,000 VAC. Recommended Maximum use Voltage: 26,500 VAC
Class 4: 1/2” thick, Dielectric Test Voltage: 50,000 VAC, Proof Tested over entire surface at 40,000 VAC. Recommended Maximum use Voltage: 36,000 VAC
V-Groove linear pattern surface “grabs” the bottom of foot wear; offering improved slip characteristics.
Tough “Koroseal” vinyl is compounded to be highly abrasion resistant and is impervious to most industrial chemicals.
Tested to ASTM D178/ANSI J6.7.
Certification engraved on back.
Features and Benefits
Corrugated Switchboard Matting protects workers against dangerous electrical shock while working around high voltage equipment. It is manufactured out of non-conductive "Koroseal" vinyl that creates an insulting barrier between the electrical source and ground. It is very effective way to prevent hazardous electrical accidents. All switchboard matting has been certified to meet all ASTM safety standards.
- Switchboard matting is a non-conductive high density vinyl compound engineered to prevent electric shock around high voltage equipment.
- The non-conductive vinyl compound creates an insulting barrier between the electrical source and ground.
- V-Groove linear pattern surface “grabs” the bottom of footwear, improving traction and safety.
- Tough “Koroseal” vinyl is compounded to be highly abrasion resistant and is impervious to most industrial chemicals.
- Matting has been tested to meet ASTM Standard D178/ANSI J6.7.
- ASTM test certification engraved on the back of the mat for authenticity.
- Choose the correct class based on your overall voltage requirements:
- Class 1: 3/16” thick, Dielectric Test Voltage: 20,000 VAC.
Proof tested over entire surface at 10,000 VAC.
Recommended Maximum use Voltage: 7,500 VAC.
- Class 2: 1/4” thick, Dielectric Test Voltage: 30,000 VAC.
Proof tested over entire surface at 20,000 VAC.
Recommended Maximum use Voltage: 17,000 VAC.
- Class 3: 3/8” thick, Dielectric Test Voltage: 40,000 VAC.
Proof tested over entire surface at 30,000 VAC.
Recommended Maximum use Voltage: 26,500 VAC.
- Class 4: 1/2” thick, Dielectric Test Voltage: 50,000 VAC.
Proof tested over entire surface at 40,000 VAC.
Recommended Maximum use Voltage: 36,000 VAC.
